Harmony Additive Pvt. Ltd.

Send Email  Sitemap

Harmony Additive Pvt. Ltd. Harmony Additive Pvt. Ltd. Harmony Additive Pvt. Ltd.

Home » Speciality Additives for Aqueous Systems

PE Wax Emulsion

Additive 5166

Send Enquiry

Additive 5166 :
PE Wax Emulsion is extensively used in aqueous formulations such as water based coatings and over print varnishes, textile and leather treatments, polishes, paper and cardboard coatings.

Furthermore, the very fine particle size makes sure an intimate and homogeneous incorporation within other ingredients of the formulation, maximizing the required effect.

Features :
  • Water Repellency
  • Abrasion Resistance
  • Slip & Lubricity
  • Anti-Blocking

Technical Data :
Appearance Pale Yellow Hazy Liquid
Nature Non-ionic
Specific Gravity 1
Solubility Miscible with Water
pH 8 - 9
Evaporation Rate Depends on rate of heating
% Volatiles 60% (Water)
Flash Point Not Applicable
Dose Level 3.0 to 5.0% wt./wt. on total system

Yes! I am interested


Economy PE Wax Emulsion

Add-Eco 5532

Send Enquiry

Additive 5532 :
Wax emulsions are now well established and extensively used in aqueous formulations such as Water Based Coatings (Emulsion Paints / Textured Paints – Interior & Exterior Finishes / Inks) and Over Print Varnishes, Textile and Leather Treatments, Polishes, Paper and Cardboard Coatings etc. This ready-to-use emulsion can be easily incorporated by simple mixing. Its very fine particle size ensures an intimate and homogeneous incorporation within other ingredients of the formulation, maximizing the required effect(s).

Advantages :
  • PE Wax Emulsion enhances following properties
  • Water Repellency
  • Abrasion Resistance
  • Slip & Lubricity
  • Anti-Blocking
Technical Data :
Appearance Translucent Liquid
Discription PE Wax with traces of Silicone
Colour Yellow to Brownish Yellow
Ionic Nature Non-ionic
% Solids 25 %
pH 8 to 9.5
Density 0.99
Compatibility Compatible with Anionic as well as Cationic products.

Dose Level:
  • 2.0 to 5.0% wt./wt. on total system.

Yes! I am interested



Wax Emulsions

Add-Eco 5532

Send Enquiry


Used in leather, polish, automotive and textile industry, the rendered Wax Emulsions are precisely manufactured by using latest machinery. Owing to their high melting point and accurate composition, the rendered wax emulsions are highly demanded. As a quality focused name, we assure that the quality of the rendered wax emulsions are never compromised.

Advantages :
  • Insoluble in water
  • High melting point
  • Longer shelf life
Technical Data :
Appearance Translucent Liquid
Discription PE Wax with traces of Silicone
Colour Yellow to Brownish Yellow
Ionic Nature Non-ionic
% Solids 25 %
pH 8 to 9.5
Density 0.99
Compatibility Compatible with Anionic as well as Cationic products.

Dose Level:
  • 2.0 to 5.0% wt./wt. on total system.

Yes! I am interested


Single Additive for Making Pigment Emulsion

Additive 5115

Send Enquiry

Additive 5115 :
Manufacturing of quality “Aqueous Paste” is a complex process. “Additive 5115” is a single and simple solution. It is a combination of proven surfactants (Anionic & Non-ionic surfactants as active ingredients), system stabilizers and product preservers. Its Low Foaming Tendency permits higher Pigment Loading and makes manufacturing process easy as well as hassle free.

Advantages :
  • Aqueous Paste based on “Additive 5115” forms homogeneous mixer with Distempers, Emulsion Paints, and Textured Paints, also it is ideally suitable for Textile Printing.
  • Aqueous Paste based on “Additive 5115” eliminates streakiness.

Procedure:
  • Premix Pigment/s and “Additive 5115” in S.S. or Plastic container. If required add some quantity of water. If possible run under high-speed stirrer for 15 minutes. Charge the Mixture thus formed to Dispersion Mill. Run it till Dispersion is achieved. (Although Additive 5115 is low foaming, addition of defoamer at regular interval is recommended to destroy the foam, if any, and achieve dispersion without hassle. Blend Defoamer with Water and this blend is required to be incorporated. Excessive of Defoamer should be avoided. Dose level of Defoamer should not exceed 0.2 to 0.4% in total) Discharge the contents from Mill. Charge the balance water to Mill and run for 5 minutes. Discharge the same to Aqua Paste container. Add thickener to achieve desired consistency.

Yes! I am interested


Organic Polymer Binder

Additive 6009

Send Enquiry

Additive 6009 :
Additive 6009 is a Very Low to Moderately Foaming Organic Polymer in Powder Form. It forms an ideal Grinding and Film Forming Medium for Water based Paints, Inks.

Advantages:
  • Grinding Medium for all types of Organic / Inorganic Pigments + Fillers
  • Excellent Leveling Properties
  • Enhances Film Binding Property

Technical Data:
Appearance Amorphous solid powder
Odor Odorless.
Colour Off-white. White. Colorless.
pH (1% soln) Not available.
Boiling Point Not available.
Melting Point Softens at about 200°C (392°F) with decomposition. Decomposition @ 228 deg. C.
Critical Temp Not available.
Specific Gravity 1.19-1.31(Water = 1)
Volatility Not available.
Ionicity(in Water) Not available.
Solubility Soluble in cold water, hot water. Insoluble in diethyl ether, acetone, petroleum solvents, aromatic hydrocarbons, esters. Practically insoluble in animal and vegetable .

Dose Level :
Distemper Paints / Putty /Ink 1 to 3 % wt/wt
Aqueous Primer / Emulsion Paints 1 to 3 % wt/wt

Yes! I am interested


Opacifying Polymer

Special Polymer

Send Enquiry

Special Polymer:
Special Polymer is powerful Opacifying Agent for Aqueous Systems. It is non-film forming aqueous emulsion polymer that reduces the raw material costs of coatings by supporting the hiding provided by the Primary Pigment. The polymer consists of hollow acrylic/styrene beads supplied in emulsion form. Initially these beads are filled with water. When a paint containing Special Polymer dries, the water diffuses replaced by air. These encapsulated air voids imparts the hiding effect. Thereby formulator can reduce the amount of titanium dioxide without sacrificing hiding power and tint strength.

Technical Data:
Appearance Milky White Liquid
Non-volatile by Wt. 37 ± 0.5
Non-volatile by Volume 52%
pH 9 ± 0.5
Flash Point Not Applicable

Dose Level :
  • Doses to be determined by experiment at Laboratory Level.

Yes! I am interested


Home   |   Company Overview  |  Our Products   |   Infrastructure  |  Quality Assurance   |   Media Gallery   |  Sitemap  |  Contact Us   |   Enquiry
Member IndiaMART.com© Harmony Additive Pvt. Ltd. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited

Looking for Product Name ?

x

Send SMS Enquiry

*Please Enter Requirment

*Please Enter valid Mobile Number

*Please Enter Proper Name